HDMI Matrix 4 x 2
With EDID Control
User manual
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
n Introduction
This is a high performance HDMI Matrix with four HDMI inputs & two outputs, it allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the two displays simultaneously, and supports 4K×2K, 3D, 12-bit Deep Color. With its 3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution.
n Features
- 1. Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
- 2. 3D HDMI 1.4a video format support.
- 3. 3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
- 4. Supports deep color up to 48-bit per pixel.
- 5. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
- 6. Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR
- 7. Full colorimetry including sYCC601,Adobe RGB,Adobe YCC601,xvYCC extended gamut color
- 8. Operates for TMDS clock frequencies up to 300MHz
- 9. Supports EDID control via EDID Selector.
n Package
- 1. HDMI Matrix ------------------------------------------------------------------------------------ 1PCS
- 2. 5V1A DC Power Supply adaptor ------------------------------------------------------------- 1PCS
- 3. Operation Manual ------------------------------------------------------------------------------- 1PCS
- 4. Remote controller---------------------------------------------------------------------------------1PCS
n Specifications
- 1. Frequency Bandwidth 2.97Gbps
- 2. Input Ports 4 x HDMI Female input ports
- 3. Output Ports 2 x HDMI Female output ports
- 4. Power Supply DC 5V 1A
- 5. ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
- 6. Dimensions (mm) 85(W) X 192 (D) X 26 (H)
- 7. Weight(g) 450
- 8. Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
- 9. Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
- 10. Relative Humidity 20 ~ 90% RH (Non-condensing)
- 11. Power Consumption (Max) 5W
n Operation controls and Functions
Front Panel
- 1. ON/OFF: Power on/off switch.
- 2. POWER LED: This red LED illuminate when the device is connected with power supply.
- 3. IR IN: Remote control signal receive.
- 4. OUTPUT A: Press this button to select input sources to HDMI OUT A，and the LED will indicate the corresponding input source.
- 5. OUTPUT B: Press this button to select input sources to HDMI OUT B，and the LED will indicate the corresponding input source.
- 6. EDID Selector: Select HDMI output signal format via EDID Selector.
Number | EDID Selector | Description |
1 | 0000 | 1080P,Stereo Audio 2.0 |
2 | 0001 | 1080P,Dolby/DTS 5.1 |
3 | 0010 | 1080P,HD Audio 7.1 |
4 | 0011 | 1080I,Stereo Audio 2.0 |
5 | 0100 | 1080I,Dolby/DTS 5.1 |
6 | 0101 | 1080I,HD Audio 7.1 |
7 | 0110 | 3D,Stereo Audio 2.0 |
8 | 0111 | 3D,Dolby/DTS 5.1 |
9 | 1000 | 3D,HD Audio 7.1 |
10 | 1001 | 4K2K,Stereo Audio 2.0 |
11 | 1010 | 4K2K,Dolby/DTS 5.1 |
12 | 1011 | 4K2K,HD Audio 7.1 |
13 | 1100 | Reserve |
14 | 1101 | Reserve |
15 | 1110 | Reserve |
16 | 1111 | Auto mode(default) |
Rear Panel
- 1. HDMI OUTPUT: These slots are where you connect the HDTV or monitor with HDMI cable.
- 2. HDMI INPUT: These slots are where you connect the HDMI source output from DVD, PS3.
- 3. DC IN: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet.
n Application Example
n Remote control
OUTPUT A: Press IN1\\IN2\\IN3\\IN4 button will fast switch to select input source to HDMI OUTPUT A, and the LED will indicate the corresponding input source. Press button OUTPUT A will cycle from input IN1\\IN2\\IN3\\IN4.
OUTPUT B: Press IN1\\IN2\\IN3\\IN4 button will fast switch to select input source to HDMI OUTPUT B, and the LED will indicate the corresponding input source. Press button OUTPUT B will cycle from input IN1\\IN2\\IN3\\IN4.