是否提供加工定制 | 是 | 品牌 | 骐骥牌 |
型号 | 砂带机 | 类型 | 立式（砂带机） |
规格 | 100*4000 | 电源电压 | 380V |
砂带线速度 | 2800（m/s） | 砂带宽度 | 100（mm） |
砂带周长 | 4000（mm） | 输入功率 | 2.75 |
输出功率 | 2.75 | 适用范围 | 金属平面拉丝 |
重量 | 250（kg） | | |
Whether to provide customized processing:Is
Brand:Many cards
Model:Abrasive belt grinding machine
Type:Vertical (belt machine)
Specifications:100*4000
The power supply voltage:380V
Belt speed:2800 (m/s)
Belt width:100 (mm)
Belt circumference:4000 (mm)
The input power:2.8
Output power:2.8
The scope of application:The metal plane drawing
Weight:250 (kg)
骐骥三角平面拉丝机
主要技术参数
重量：250kg
电机马达总功率：2.75kw
主电机转速：1400～2800min/s
砂带规格：100*4000mm
工作台面大小：1200*560mm
工作上下行程：400mm
安全操作规程：
1、操作前必须仔细阅读使用说明书，熟悉基本操作方法，合理操作，确保最大的安全性。
2、确保机床有效接地。
3、开机前，严禁携带手表、手镯、项链等饰品，袖口要系紧，长发须束好，禁止穿拖鞋。清除机器上面和周围杂物，不容许有任何物品放置在进料口上，做好个人的防护工作。
4、本机不准加工过小或过大的工件，工件的进给速度和加工量要根据具体情况确定好，不要超速开机，不要在加工量过大的情况下开机。
5、决不使用带划痕或裂缝的砂带。安装砂带前，应确保各工作辊表面光滑，无污物和压痕，确认砂带运转方向和砂带背面标记一致；安装砂带后，检查砂光装置，应锁紧牢固。
6、设备运转中不得打开安全门，不准随意触摸升降工作台。
7、设备在运转和设备未完全停止运转前，操作者不得擅自离岗。
8、修理和检查调整部件时，必须关闭电源，在停机时进行
注意：此价格不包含税费、运费和打包费，详情请联系客服。
东莞市兴海砂带有限公司
骐骥抛光拉丝机械制造厂
3M研磨抛光产品经销商
公司主要生产：五金、电子、家具、鞋材、汽配、产品外部粗加工、精加工，生产打磨机、抛光机、抛管机、拉丝机、自动化抛光设备等。公司以“质量第一，顾客至上”为服务宗旨，可以依据客户的需求设计和制造各种自动及半自动化机械抛光拉丝设备。
目前，公司成为了美国3M公司广东地区研磨产品特约经销商；TOA砂纸东莞特约经销商；湖北玉立集团东莞研磨系列产品代理商。
我们真诚的希望成为家具、汽车、餐具、玩具、钟表、眼镜、灯饰、高尔夫球杆、机械、运动器材、碳铅维等行业的忠实伙伴。
欢迎来电咨询洽谈，电话：
Steed triangle plane drawing machine
The main technical parameters
Weight: 250kg
The total power of motor: 2.8KW
The main motor speed: 1400 ~ 2800min/s
Belt specifications: 100*4000mm
Work table size: 1200*560mm
Work up and down stroke: 400mm
The rules for safe operation:
1, must carefully read the instructions before operation, familiar with the basic operation method, reasonable operation, to ensure maximum safety.
2, ensure that the machine is effective grounding.
3, before the start, it is strictly prohibited to carry a watch, bracelet, necklace and other ornaments, cuff to fasten, long hair bundle is good, no slippers. Remove the machine above and around the debris, do not allow any items placed in the feeding port, good personal protection work.
4, the machine is not processing is too small or too large workpiece, feed speed and machining of the workpiece according to the specific circumstances to determine a good, not speeding boot, not excessive cases boot in processing.
5, never use with scratches or cracks belt. Install belt before, should ensure that the work roll surface is smooth, no dirt and indentation, confirm the belt running direction and abrasive belt back consistent marker; belt after installation, check the sanding device, should be firmly locked.
6, equipment operation shall be allowed to open the safety door, touch the lifting work table.
7, equipment in operation and equipment are not completely stopped, the operator shall not leave.
8, repair and inspection and adjustment parts, turn off the power, in stop mode
Note: this price does not include taxes, freight and packing charges, please contact customer service.
Dongguan Xinghai belt Co., Ltd
Steed polishing wire drawing machine manufacturing plant
3M polishing products distributor
The company mainly produces: hardware, electronics, furniture, shoe, auto parts, product external rough machining, finish machining, production grinding machine, polishing machine, polishing tube machine, drawing machine, automatic polishing equipment etc.. Company to "quality first, customer first" as a principle of service, can according to customer's various demand design and the manufacture of automatic and semi automatic machinery drawing polishing equipment.
At present, the company has become America 3M company Guangdong area grinding products dealer; TOA sandpaper Dongguan and our distributors; Hubei Yuli group Dongguan abrasive products agents.
We sincerely hope to become the automobile, furniture, tableware, toys, watches, glasses, lighting, golf clubs, machinery, sports equipment, carbon plumbic dimension industries such as a loyal partner.
Welcome to inquire, Tel: